Using the Technology in the Moraine Rooms

Overview

Video

Steps

Follow these steps to turn on the systems in the Moraine Rooms.

Powering Up:

1. Press “On” on the projector remote to turn on the projector(s) being used. The remote is located on the podium. Point the projector remote directly at the projector(s). NOTE: The lights in the Moraine Rooms can sometimes interfere with the remote working, so stand closer to the projector(s) when powering on.
   


2. On the controller, select Video Presentation.
   


3. Tap on the projector(s)needed. I.E. If using Moraine Room 1, Projector 1 should be selected. This will lower the screen(s). NOTE: One, two, or three projectors can be selected. Keep in mind that every projector being used has to be turned on manually with the remote.
   


4. Tap on the source room. If using both MR1 and MR2 but using the computer in MR1, tap on Room 1. NOTE: Only one room can be selected.
   


5. This is usually the PC, but the Moraine Rooms have a DVD/VCR player or can have a laptop hooked up. Ask the user what they are using for presenting.
   


6. Press the power button on the computer (located inside of the podium, near the bottom). Tap on the source being used.

Shutting Down:

1. On the controller, press "Main Page."
   


2. Press System Shutdown
   


3. Confirm Shut Down.
   


4. Shut down the computer as normal.


5. Press “Standby” twice on the projector remote. The first time will ask for confirmation. Press it again to power down the projector.
   

Notes and Other Troubleshooting:

On the controller, you will find a PGM UP, PGM DOWN, PGM Mute, and Utility buttons. See below for information about each button.

PGM UP

• Raises volume of computer, laptop, DVD/VHS player audio
  • Does not raise volume of room microphones

PGM DOWN

• Lowers volume of computer, laptop, DVD player audio
  • Does not lower volume of room microphones

PGM MUTE

• Mutes the computer, laptop, DVD player audio
  • Does not mute the room microphones

UTILITY

• Room control
  • Mic control
    • If the podium microphone is not working, make sure Mic 1 is not muted. This is a touch panel, so the mics can be muted and un-muted by touching Mute/Un-Mute.

Additional Resources

For more information, please contact the Help Desk at (708) 608-4357 or stop by T520.